4AXIS STRATEGIE ROTARY MODEL ( NOT WRAPPED / NOT STRAIGHT MODEL )

[shikhon]

Hi every body
i have 4 axis machine XYZA axis , (the rotary axe along x axis )
i have a problem while doing rotary g codes with the following model style

i am new user with gibbscam , i need your help , which steps i must follow from A to Z
to finally have g codes for my stl model which is not straight along one line

Similar Threads:

• Manuals for Wasino Model LG-71 Turning Center and Mori Seiki Model MV-40B VMC
• Need Help!- surface model vs Solid model machining
• 4 axis rotary - tool clashes with model
• Need Help!- How To Model Rocks for Site Model
• Rotary Machining- Unwrapping of 3D model in Artcam resolved

[Species8472]

I think the problem is that you are using a .STL file for geometry. AFAIK you can't use .STL for surfacing in gibbs. I found that it is almost impossible to convert from .STL to anything useful for programing.

[ibrahiem]

not from file just mach3 cant read my g code will or i have mistake about output g code