4AXIS STRATEGIE ROTARY MODEL ( NOT WRAPPED / NOT STRAIGHT MODEL )
Hi every body
i have 4 axis machine XYZA axis , (the rotary axe along x axis )
i have a problem while doing rotary g codes with the following model style
i am new user with gibbscam , i need your help , which steps i must follow from A to Z
to finally have g codes for my stl model which is not straight along one line
I think the problem is that you are using a .STL file for geometry. AFAIK you can't use .STL for surfacing in gibbs. I found that it is almost impossible to convert from .STL to anything useful for programing.