Need Help! Need Post for Daewoo


Results 1 to 3 of 3

Thread: Need Post for Daewoo

  1. #1
    Registered
    Join Date
    Feb 2012
    Location
    USA
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Need Post for Daewoo

    Hello,
    I am looking for a post for a Daewoo Puma 2500SY with a Fanuc 18 control.

    Similar Threads:


  2. #2
    Registered
    Join Date
    May 2004
    Location
    United States
    Posts
    4519
    Downloads
    0
    Uploads
    0

    Default

    Did you try the Fanuc 18T post processor attached to this thread:

    http://www.cnczone.com/forums/gibbsc..._needed-2.html



  3. #3
    Registered
    Join Date
    Feb 2012
    Location
    USA
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default

    Thanks txcncman. I,ll give it a try.



  4. #4
    TENTHANH's Avatar
    Join Date
    Feb 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    How can i download the post on this thread. It ask me to register all the time thanks



  5. #5
    TENTHANH's Avatar
    Join Date
    Feb 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Can you help me download it and send to my email please thanhviha91@gmail.com



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need Post for Daewoo

Need Post for Daewoo