I have been asked to program our custom door designs into our new voorwood A515-CNC. I am having a hard time trying to figure out the varriables to put into the program, like R1;R2;X1;X2;Y2. I used auto-cad to draw up the door-jig and i thought i had the correct varriables but I have to still run by trial and error to get the result we want to come out of the machine. Is there any way or a program that i can use to get the correct varriables and not waste so much time?
Anyone with questions about Voorwood Company equipment can contact us directly for answers. Our technical services can be reached at 530-365-3311 (Option 3) or visit Woodworking Machinery, Converting Machinery, Tooling - Voorwood for additional contacts & information.
Programming for the A515-CNC requires more explanation than is easily posted here; Your machine should have a user manual which explains how to setup the machine - replacements can be ordered from our parts department. Be sure to have the serial number handy when contacting any department for assistance; the serial number is engraved on a plate located on the side or back of the machine and directs staff to the specifics for your machine.