You're seeing those parallel lines because your step-over is so coarse. 30% is fine for a roughing pass, but not for the final one. Reduce it to something like 1/20th of the diameter of your tool and it will be a lot smoother.
Good day
Please see photo
I used end mill 3mm for finishing
feed rate 25mm/sec
step over is 30%
spindle speed 8000 rpm
depth of the cut 8mm
stock thickness 18 mm
There are 2 issues as you can see in the photo
1-You can see the half circules (like if the bit is drilling holes not milling) along the neck line.
2-the second issue is the bit stroke lines like strips. I think this has to do with the spindle vertical alignment (Not sure because the alignment looks fine).
Philip
Thanks
Similar Threads:
Last edited by PhilipTheArab; 12-21-2021 at 04:24 AM.
You're seeing those parallel lines because your step-over is so coarse. 30% is fine for a roughing pass, but not for the final one. Reduce it to something like 1/20th of the diameter of your tool and it will be a lot smoother.
[FONT=Verdana]Andrew Werby[/FONT]
[URL="http://www.computersculpture.com/"]Website[/URL]
I will give it a try
Thanks for taking the time to help
Philip
I don't know what software is being used but some programs will allow you to define boundaries and this allows you to use a larger tool for the areas with less sharply defined detail and confine the smaller tools to the nooks and crannies.It could save a lot of time as well as giving a better finish on the more gently curved areas.The direction of cuts may be specified to refine the finish in some areas also.If your software allows such a thing.
I am using carveco/artcam for toolpath generation and linuxcnc for control. Blender and fusion360 for 3d.
I thought the same as you mentioned, and I am trying to experement with artcam settings. For instance I could use helical toolpath instead of raster, and will play with ramping angles and other settings.
Firstly I will reduce the stepover and/or use smaller diameter tool.
Thanks
Philip
In 2015, Gluons Technology Company began its adventure with a variety of automation devices. Our Gluons Shop is special in both its design and its function. Customers can browse and Buy Things Online with us.