Another great turning project from Dick Sing. This turned base really dresses up this calculator which in turn can dress up any desk. These make great gifts for everyone and you can really get creative with your designs!
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Supporting documentation for this video can be found on the companion website. This link will take you to that resource page… https://makingstuffwithchrisdehut.com/woodworking-files
Cheers!
Chris DeHut
Note: I could not find the source for the calculator - if someone knows of a source, please post it in this thread. THANK YOU!
For a REALLY custom look on your cabinets and furniture, try your hand at a carved handle or pull. The drawer/door handle (pull) is the one object everyone will touch and feel on your cabinets. If you want your cabinet to stand out, take a look at this video and watch as David Reilly walks you through the process of carving this leaf shaped pull.
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Supporting documentation for this video can be found on the companion website. This link will take you to that resource page… https://makingstuffwithchrisdehut.co...working-files?
Fine joinery requires tight fits and accurate cutting and more often than not, you are working in tolerances of a few thousandths of an inch. Many woodworkers get by on feel and intuition etc. However, for the rest of us, we use tools that help us measure to these accuracies. The dial (or digital) caliper is one such tool that not only measures, but is also a GREAT layout tool.?
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Please visit the companion website for more information about these videos… https://makingstuffwithchrisdehut.com/
Turning with skews is a challenge for all woodturners, especially the beginners. If you want to master the skew, watch this video. Dick Sing explains the techniques of how and why for skews.
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Please visit the companion website for more information about these videos… https://makingstuffwithchrisdehut.com/?
Make this Stool for Your Shop
Make this sturdy shop stool for your workshop. Features a comfortable solid wood seat that rotates, a foot rest that is at a comfortable height and a distinctive hand made look. Take a load off and spend more time COMFORTABLY in your shop.
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Please visit the companion website for more information about these videos… https://makingstuffwithchrisdehut.com/
Serving Trays for a Fun Project
Learn how to make these attractive serving trays for your home. These are not only attractive, they are functional and show off a variety of your woodworking skills. Make some for yourself or better yet, make some as gifts to friends and family
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Supporting documentation for this video can be found on the companion website.
This link will take you to that resource page… https://makingstuffwithchrisdehut.com/woodworking-files
Is it worth it to upgrade CNC with Closed Loop Steppers?
After 6 months of use, was this update worth it? In Sept. 2022, I upgraded my CNC router with closed loop stepper motors and drives. This video answers the question "Was it worth it".
Molding planes are fantastic tools that are deeply imbedded in the traditions of woodworking. Making custom planes is certainly a skill serious woodworkers should consider learning. David Reilly walks you through the entire process in this two part video.
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine. Supporting documentation for this video can be found on the companion website. This link will take you to that resource page… https://makingstuffwithchrisdehut.com/woodworking-files
Part 2 of 2... Molding planes are fantastic tools that are deeply imbedded in the traditions of woodworking. Making custom planes is certainly a skill serious woodworkers should consider learning. David Reilly walks you through the entire process in this two part video.
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Supporting documentation for this video can be found on the companion website. This link will take you to that resource page… https://makingstuffwithchrisdehut.com/woodworking-files
This project started out as a request from a friend for a stand to display valuable books at the entrance to a home. Its design lends itself as a Lectern, Podium, Book Stand, and probably more. Even if you are not interested in making this, there are plenty of techniques that can be learned in this video. Take a break, and follow along as Chris walks you through the processes involved in this project.
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
In this video on Mortising, the Drill Press and Hollow Chisel Mortising machines are explained and demonstrated. With so many options, there is no excuse to not work with these very strong joints.
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Please visit the companion website for more information about these videos… https://makingstuffwithchrisdehut.com/
The linen fold form is one of the all time classics for carving. This design dates back generations, and can still be seen in finely crafted architectural elements and fine furniture. David Reilly demonstrates the process so that you can learn this highly coveted skill.
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Please visit the companion website for more information about these videos… https://makingstuffwithchrisdehut.com/
Re: New/Old woodworking videos on YouTube
Reply with Quote
