Newbie New Member First Post


Results 1 to 5 of 5

Thread: New Member First Post

  1. #1
    Member jg2259's Avatar
    Join Date
    Jun 2021
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default New Member First Post

    Hello all,
    I’m a retired steelworker who has been woodworking for about 10 years.
    I’m 69 years old and have noticed that I am slowing WAY down, doing the woodworking that I love. My body just doesn’t have the get up and go that I once had.
    And that, is what brings me to this forum. I want to purchase a CNC to help me in my woodworking. Why don’t I just go buy one and get it on?
    Because I’m sure there are people that have done that but I want to start from scratch.

    I know NOTHING about CNC. I want to learn. I am willing to spend between $1000 and $4500, IF I can get something with a small learning curve, or plug and play. I would really like to stay around $2500. I’m not CNC literate.
    I don’t need anything super big, maybe 4’ x 4’ max.
    If there is anyone out there that could spare a little time to give me some guidance and direction, I would be very grateful.

    Thanks,
    Jim


    Sent from my iPhone using Tapatalk

    Similar Threads:


    • #2
      Member
      Join Date
      Apr 2004
      Location
      Oakland CA USA
      Posts
      5361
      Downloads
      0
      Uploads
      0

      Default Re: New Member First Post

      If your woodworking energy is flagging, I'd hesitate to advise you to launch into a CNC-building project. But if you have a lot of enthusiasm for building things out of metal, and the skills and equipment to do it with, then it might be worth considering. Check out as many build threads on this site as you can manage; let other people's struggles inform your own. In general, you should strive for maximum rigidity; this - or the lack of it - will be immediately apparent in your cut quality. Build the frame before shopping around for electrical and electronic parts; things can change in the middle of a build, and you don't want to be stuck with motors and drivers that limit its performance. Also, there's a lot to learn about all this stuff, and giving yourself more time to learn it is a good thing.

      On the other hand, it might make more sense to look around for a good deal on a used CNC router, rather than try to build one from scratch. Many brands have forums where people try to sell their used machines; it's also worth checking your local Craigslist or used machinery dealers. There's usually enough work to do in upgrading and maintaining a machine to satisfy most of us. If you're doing this to accelerate your woodworking projects, machine building would be a sidetrack, although it can be an interesting one.

      Andrew Werby
      https://computersculpture.com/


    • #3
      Member
      Join Date
      Nov 2008
      Location
      USA
      Posts
      496
      Downloads
      0
      Uploads
      0

      Default Re: New Member First Post

      If you have access to metal, a welder and other metal working tools then I’d recommend building it. You will probably end up with something better than you can buy.
      4x4 is a bit large but it all depends what materials you have. Like a granite slab makes a great base.


      Sent from my iPhone using Tapatalk



    • #4
      Member jg2259's Avatar
      Join Date
      Jun 2021
      Posts
      4
      Downloads
      0
      Uploads
      0

      Default Re: New Member First Post

      I don’t have any metal working equipment and don’t plan on purchasing any. I am more interested in purchasing a CNC that is ready to use or at least one that supplies all the parts needed for me to build. I’m actually looking for one that can make use of my Dewalt DWP611 router. I am not afraid to attempt to build a kit if I am sure that all the parts are sturdy and can give me stability and accuracy.


      Sent from my iPhone using Tapatalk



    • #5
      Member
      Join Date
      Nov 2008
      Location
      USA
      Posts
      496
      Downloads
      0
      Uploads
      0

      Default Re: New Member First Post

      Check out openbuilds.com


      Sent from my iPhone using Tapatalk



    Tags for this Thread

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •  


    About CNCzone.com

      We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

    Follow us on


    Our Brands

    New Member First Post

    New Member First Post

    New Member First Post