Hi,
I have a Biesse Rover B 2004.
A Fantastic Machine!!!!
I always work on the left stoper.
When program ends, the machine follows the command:
L=POFF
It then moves to the right end point and turns off.
I would like it to move to left end point instead and turn off.
Anybody knows how to do that?
Attached is a Sample Program.
This is parrt of the code:
N120 X254.2905 TP=1 G40 PRF=7.8563 L=PON F=12 VF=3 S=20000 AX=X,Y,Z G46 TRZ=0 M55
N130 G1 X184.7655 ZI20.5563 F=3
N140 G1 X0.7684 F=12
N150 G1 X0.7624 Y0.7625
N160 G1 X368.7625
N170 G1 Y208.7625
N180 G1 X184.7655
N190 G1 X176.7655
N200 G1 X107.2405 ZI-20.5563 G40
N210 L=PSU
N220 X258.0655 TP=1 G40 PRF=-6.35 L=PON F=12 VF=3 S=20000 AX=X,Y,Z G46 TRZ=0 M55
N230 G1 X184.7655 ZI36.65 F=3
N240 G1 X0.7684 F=12
N250 G1 X0.7624 Y0.7625
N260 G1 X368.7625
N270 G1 Y208.7625
N280 G1 X184.7655
N290 G1 X176.7655
N300 G1 X103.4655 ZI-36.65 G40
N310 L=POFF
%
Hi there,
The setting for this is not in the program, it is a setting in the machine data tables.
You would need a biesse tech to modify the tables.
Hi,
I have a Biesse Rover B 2004.
A Fantastic Machine!!!!
I always work on the left stoper.
When program ends, the machine follows the command:
L=POFF
It then moves to the right end point and turns off.
I would like it to move to left end point instead and turn off.
Anybody knows how to do that?
Attached is a Sample Program.
This is parrt of the code:
N120 X254.2905 TP=1 G40 PRF=7.8563 L=PON F=12 VF=3 S=20000 AX=X,Y,Z G46 TRZ=0 M55
N130 G1 X184.7655 ZI20.5563 F=3
N140 G1 X0.7684 F=12
N150 G1 X0.7624 Y0.7625
N160 G1 X368.7625
N170 G1 Y208.7625
N180 G1 X184.7655
N190 G1 X176.7655
N200 G1 X107.2405 ZI-20.5563 G40
N210 L=PSU
N220 X258.0655 TP=1 G40 PRF=-6.35 L=PON F=12 VF=3 S=20000 AX=X,Y,Z G46 TRZ=0 M55
N230 G1 X184.7655 ZI36.65 F=3
N240 G1 X0.7684 F=12
N250 G1 X0.7624 Y0.7625
N260 G1 X368.7625
N270 G1 Y208.7625
N280 G1 X184.7655
N290 G1 X176.7655
N300 G1 X103.4655 ZI-36.65 G40
N310 L=POFF
%