Error

[Redfisher66]

I'm using a Flow Mach 4 4020c model and getting an error for "Station: Z1_Axis, Module:X67AI1223,Slot 2, Error: Module unplugged or not configured!"
Haven't had this problem before any help would be greatly appreciated.

Similar Threads:

• Problem- What is this error : Delta Internal Error!(Movement Error)
• Problem- What type of error : Delta Internal Error![Movement Error]
• Problem- What type of error : Delta Internal Error![Movement Error]
• Need Help!- 18i Error 3000 PMC-MACRO Contact ERROR random error on Tool Change
• Need Help!- Has anyone ran into this error? Parasolid ® Kernel Interface Error: KI Error Code:58

[Redfisher66]

I'm using a Flow Mach 4 4020c model and getting an error for "Station: Z1_Axis, Module:X67AI1223,Slot 2, Error: Module unplugged or not configured!"
Haven't had this problem before any help would be greatly appreciated.

I figured it out. Had to go into hydramapping and reset the drivers basically.