I have been trying to save the edited bios with new hard drive CHS address info. The info in the bios shows F10 to save, the keyboard on the Agiecut CF CNC dos not have an F10. If anyone knows how to save the bios changes with the Cf keyboard or how to connect the PS2 keyboard which has the F10 key, please let me know. The card inside the CF cabinet has a PS2 connector, but when I connect the PS2 keyboard and reboot the agie does not see it. If anybody knows what I am doing wrong please let me know, I will be very grateful.
if there is key on your working keyboard? it is used to circle on controls selection. You can select the choice "save and exit" and activate selection after by pressing or
Reply with Quote
Saving bios setting in agie 120 edm
