Trumpf WS4000 encoder defective ERROR!


Results 1 to 1 of 1

Thread: Trumpf WS4000 encoder defective ERROR!

  1. #1
    Member
    Join Date
    Jan 2017
    Location
    Ukraine
    Posts
    2
    Downloads
    0
    Uploads
    0

    Exclamation Trumpf WS4000 encoder defective ERROR!

    Hi, All!

    We have Trumpf WS4000 WaterJet machine, 3 weeks ago, we gets that error (P2-Fault ENCODER DEFECTIVE), This error work very strange!!! She may appear when machine going to home, but if procedure was good, and then we move X-axis on diffent speeds, we offen gets this error.


    Question:
    How understand, where generates that error? Guilty motor, driver, cable or all this?

    We check the cable, disassembled motor and driver, and nothing!!!! All parts good!!! But machine don't work!

    HELP !!! PLEASE!!!

    Thanx, for any help!

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Trumpf WS4000 encoder defective ERROR!-20191130_093100-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Trumpf WS4000 encoder defective ERROR!

Trumpf WS4000 encoder defective ERROR!

Trumpf WS4000 encoder defective ERROR!