Raised text.

Results 1 to 2 of 2

Thread: Raised text.

  1. #1
    Registered
    Join Date
    Apr 2015
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Raised text.

    I'm working on a project that will require a 5mm font
    raised by 1mm of which I will be making a latex mould. I will be using a 1mm ball nose cutter.
    Can foamex board be used for this type of milling. If not any suggestions on type of material to get clean sharp text?.
    Thanks

    Similar Threads:


  2. #2
    Member ssw's Avatar
    Join Date
    Mar 2011
    Location
    United States
    Posts
    59
    Downloads
    0
    Uploads
    0

    Default Re: Raised text.

    Hello,
    Although I personally have not had the chance to use these FREEMAN products myself, I have heard good reviews: https://www.freemansupply.com/produc...styling-boards
    Hope this helps.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Raised text.

Raised text.