Corafoam Sign Making

Results 1 to 4 of 4

Thread: Corafoam Sign Making

  1. #1
    Registered
    Join Date
    Jul 2012
    Location
    Canada
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Corafoam Sign Making

    This is my first venture into sign making using Corafoam and wanted to draw upon the expertise on this forum for some advice. I have purchased a 4' x 8' sheet of 1" thick #15 Corafoam. These are some of my questions/concerns.

    1. Can Corafoam be painted with latex and/or oil based paints?
    2. Is Corafoam strong enough to make a free hanging sign ( 20" x 30") and if so, what type of hooks, screws or bolts are recommended?
    3. Associated with the previous question, can you drill holes int Corafoam to pass bolts through?

    Thanks in advance for any help...

    Dennis

    Similar Threads:


  2. #2
    Registered
    Join Date
    Mar 2016
    Location
    Canada
    Posts
    42
    Downloads
    0
    Uploads
    0

    Default Re: Corafoam Sign Making

    to your all your questions to all the above is yes yes you can no solvent paint will hurt it drill it hang it just like wood with out the rot twisting etc etc



  3. #3
    Member
    Join Date
    Jun 2017
    Posts
    358
    Downloads
    0
    Uploads
    0

    Default Re: Corafoam Sign Making

    Im following this thread for any information I can learn, but I have a question for transformer82, your post was a little hard to follow without punctuation. Do you mean yes you can, no solvent paint will hurt it. Or did you mean. No, solvent paint will hurt it?

    Thanks



  4. #4
    Registered
    Join Date
    Mar 2016
    Location
    Canada
    Posts
    42
    Downloads
    0
    Uploads
    0

    Default Re: Corafoam Sign Making

    sorry .... (nothing will hurt it ) you can use solvent paint,



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Corafoam Sign Making

Corafoam Sign Making