Newbie PC Interface Board Recommendation

Results 1 to 1 of 1

Thread: PC Interface Board Recommendation

  1. #1
    Member
    Join Date
    Aug 2014
    Posts
    1
    Downloads
    1
    Uploads
    0

    Default PC Interface Board Recommendation

    Hello,

    I recently acquired an Systro 4 axis CNC table with DC servo system (ISEL PVD servo driver unit, SKC DH series servo motors). The servo driver unit has a 50 pin connector with a pin for each of the axis described below:

    Index +
    Index -
    Track A+
    Track A-
    Track B+
    Track B-
    Analog Input (Control voltage)
    Reference switch pin
    limit switch positive
    limit switch negative
    (attached is full pinout)


    I am new to CNC machines and from the research I have done so far, I may be able to get a USB interface board and use this setup with Mach 3 software. However, when I look at the specs of some Mach 3 USB interface boards, I can't tell if they can be used with my system or not because I don't know what the pin names in my system do (ie, index pins vs track A/B pins).

    I am looking for some recommendation as to which mach 3 USB interface board would work with my system and also some help to understand what the index (+/-) and Track A/B pins do. Any help is appreciated.

    Thank you.

    Similar Threads:
    Attached Files Attached Files


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

PC Interface Board Recommendation

PC Interface Board Recommendation