ISEL Software

Results 1 to 15 of 15

Thread: ISEL Software

  1. #1

    Default ISEL Software

    Hello all,

    I have an old ISEL GFV machine, with servo UPMV 4/12 controller and UVE 8012 power stages, with old software for MS-DOS, Remote over ISELDRV.EXE.

    Does anyone have the Windows version of Remote for UPMV 4/12? ISEL does not provide it anymore, I asked them, and tried current version of Remote: does not have UPMV 4/12 anymore.

    Thank you,
    All the best,
    Valentin

    Similar Threads:


  2. #2
    Member
    Join Date
    Oct 2016
    Location
    Netherlands
    Posts
    30
    Downloads
    2
    Uploads
    0

    Default Re: ISEL Software

    Maybe it's good that you contact the following web site:
    https://www.isel.com/de/produkte/sof...ml?___store=de



  3. #3

    Default Re: ISEL Software

    Of course I've been there and wrote them and also spoke by phone: replies were constant "we don't offer software for that controller, because it is too old. Throw it away and buy new." I don't know what this means in money, but I would not be surprised that only the controller is more expensive than what I can get for my whole 350 kg machine.

    Those conversations with them I had about 6 years ago.



  4. #4
    Member
    Join Date
    Mar 2016
    Location
    Poland
    Posts
    322
    Downloads
    0
    Uploads
    0

    Default Re: ISEL Software

    Did U try galaad software?
    In my opinion it is much more user friendly than isels.



  5. #5

    Default Re: ISEL Software

    According to this, Galaad also does not support UPMV 4/12.

    https://www.cnczone.com/forums/gener...-software.html

    Thanks for the idea, though!



  6. #6
    Member
    Join Date
    Oct 2016
    Location
    Netherlands
    Posts
    30
    Downloads
    2
    Uploads
    0

    Default Re: ISEL Software

    Quote Originally Posted by valentin777 View Post
    Hello all,

    I have an old ISEL GFV machine, with servo UPMV 4/12 controller and UVE 8012 power stages, with old software for MS-DOS, Remote over ISELDRV.EXE.

    Does anyone have the Windows version of Remote for UPMV 4/12? ISEL does not provide it anymore, I asked them, and tried current version of Remote: does not have UPMV 4/12 anymore.

    Thank you,
    All the best,
    Valentin

    Here you may find what you are looking for:
    https://www.isel.com/en/support-down...germanyag.html



  7. #7

    Default Re: ISEL Software

    Hi,

    Current versions of Remote DO NOT contain drivers for UPMV 4/12. I have a Remote setup kit downloaded from their site, it misses MCTL_UPMV4.DLL (motion control) and a few more (spindle control, IO, etc) . I also wrote/spoke with them: same result.

    This guy from Croatia was also not finding them in 2015, same answer from ISEL: "we don't support such old controller".

    https://www.cnczone.com/forums/techn...-software.html

    Thank you,
    Valentin



  8. #8
    Member
    Join Date
    Dec 2016
    Location
    United Kingdom
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: ISEL Software

    BUMP.
    I have the same issue.Any help would be greatly appreciated.



  9. #9
    Member bp_me's Avatar
    Join Date
    Aug 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: ISEL Software

    I have a really old version of remote that does what you are asking for. It seems to be stuck in german though.



  10. #10
    Member
    Join Date
    Dec 2016
    Location
    United Kingdom
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by bp_me View Post
    I have a really old version of remote that does what you are asking for. It seems to be stuck in german though.
    Is that a DOS or windows version? If it’s Windows It would be very helpful



  11. #11
    Member bp_me's Avatar
    Join Date
    Aug 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: ISEL Software

    Quote Originally Posted by rc-worcs View Post
    Is that a DOS or windows version? If it’s Windows It would be very helpful
    Windows. It even seems happy to run on Win10. Though I'm currently waiting on cables to come to verify that.



  12. #12

    Default Re: ISEL Software

    Hello Brendan,

    I'm very interested in your Windows version of Remote, that can drive UPMV 4/12. Please: does it contain MCTL_UPMV4.DLL? Or some mctl____.vxd?

    Best regards,
    Valentin.



  13. #13
    Member bp_me's Avatar
    Join Date
    Aug 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by valentin777 View Post
    Hello Brendan,

    I'm very interested in your Windows version of Remote, that can drive UPMV 4/12. Please: does it contain MCTL_UPMV4.DLL? Or some mctl____.vxd?

    Best regards,
    Valentin.
    I'm unsure what's in the cab files. It gives the option for the upmv 4/12 during the installation. I'm using an icm4 machine myself.



  14. #14

    Default Re: ISEL Software

    Hi Brendan,

    Could you please PrivateMessage me? or email valentin777 at gmx.net?

    Best regards,
    Valentin



  15. #15
    Member crisiacuf's Avatar
    Join Date
    Apr 2019
    Location
    Bucuresti
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: ISEL Software

    Hi Brendan, valentin777,

    Can I also have that software please? Stuck in exactly same problem

    Thank you very much



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

ISEL Software

ISEL Software