Maybe it's good that you contact the following web site:
https://www.isel.com/de/produkte/sof...ml?___store=de
Hello all,
I have an old ISEL GFV machine, with servo UPMV 4/12 controller and UVE 8012 power stages, with old software for MS-DOS, Remote over ISELDRV.EXE.
Does anyone have the Windows version of Remote for UPMV 4/12? ISEL does not provide it anymore, I asked them, and tried current version of Remote: does not have UPMV 4/12 anymore.
Thank you,
All the best,
Valentin
Similar Threads:
Maybe it's good that you contact the following web site:
https://www.isel.com/de/produkte/sof...ml?___store=de
Of course I've been there and wrote them and also spoke by phone: replies were constant "we don't offer software for that controller, because it is too old. Throw it away and buy new." I don't know what this means in money, but I would not be surprised that only the controller is more expensive than what I can get for my whole 350 kg machine.
Those conversations with them I had about 6 years ago.
Did U try galaad software?
In my opinion it is much more user friendly than isels.
According to this, Galaad also does not support UPMV 4/12.
https://www.cnczone.com/forums/gener...-software.html
Thanks for the idea, though!
Here you may find what you are looking for:
https://www.isel.com/en/support-down...germanyag.html
Hi,
Current versions of Remote DO NOT contain drivers for UPMV 4/12. I have a Remote setup kit downloaded from their site, it misses MCTL_UPMV4.DLL (motion control) and a few more (spindle control, IO, etc) . I also wrote/spoke with them: same result.
This guy from Croatia was also not finding them in 2015, same answer from ISEL: "we don't support such old controller".
https://www.cnczone.com/forums/techn...-software.html
Thank you,
Valentin
BUMP.
I have the same issue.Any help would be greatly appreciated.
I have a really old version of remote that does what you are asking for. It seems to be stuck in german though.
Hello Brendan,
I'm very interested in your Windows version of Remote, that can drive UPMV 4/12. Please: does it contain MCTL_UPMV4.DLL? Or some mctl____.vxd?
Best regards,
Valentin.
Hi Brendan,
Could you please PrivateMessage me? or email valentin777 at gmx.net?
Best regards,
Valentin
Hi Brendan, valentin777,
Can I also have that software please? Stuck in exactly same problem
Thank you very much