ISEL controller is CV PV-3
Good day to all.
I have an old ISEL machine (PC running DOS with UPMV 4/12 card and I / O boards, drive control unit). I do not know its model. Recently, there was an error reading HDD and the machine stopped to be controlled. When you run the ISELDRV.EXE file, the "Program too large to fit in memory" error appears. It was not possible to restore the data completely. After analyzing the contents of the executable file, it appeared that ISELDRV.EXE was damaged. Does anyone have this file?
I'm ready to install other software, but I'm not sure that it supports this hardware. Can someone had a similar and share experience? Or are there other ways to solve this problem?
Thank you
Similar Threads:
ISEL controller is CV PV-3
I have a copy, I am just trying to install the USB drivers on the win98 machine so I can get a copy. I'll post it when i have it.
Did U try to use other software?
Check galaad software (precisely Key programm). It should enable to connect any computer with Your machine. U can check demos.
I told with Galaad support and they said, that "Isel UPMV4/12 is a bit complicated since control is not direct from Galaad to the communication port. It requires the DLL and INI files that are provided with the machine." I have not these files for Windows and cannot find them for this time.
What about Kay I didn't find my conroller CP PV-3 in demo-version. Did you find it?
Last edited by habariniv; 01-16-2018 at 04:47 AM.
I contacted Key for the same question - to update the machine, I would buy it tomorrow if it worked. They have tried to integrate the UPMV card in the past, but had some compatibility issues. They do not reccomend using it. If you could get it working, you still need to use the ini files etc
ISEL RemoteWIN manual shows that it should be compatible with the UPMV card. I have asked for confirmation from our local dealer before I buy. I am waiting to hear back.
RemoteWIN looks far better than RemoteDOS
I think i have remote WIN in my job. Not using it. U can try it if U want.
that was painful!
I have ISELDRV.EXE now. I cant seem to post it here. I shall try and message it .
I can't find our copy. I remember we had all the box with manual etc., but can't localise it. Sorry.
If i will get it soon i'll reply.
Thanks for all. Special thanks to rc-worcs. I copied good files and mashine back to life