tracking changes in z height of material.

Results 1 to 2 of 2

Thread: tracking changes in z height of material.

  1. #1
    Member
    Join Date
    Nov 2016
    Location
    United States
    Posts
    1
    Downloads
    0
    Uploads
    0

    Question tracking changes in z height of material.

    I am engraving 2' x 2' plaques where the metal is close, but not exactly flat. And any change in depth results in less than stellar final products, because the text i am working with it pretty thin. I have a dual drum sander that get things closer to flat, but only closer. I am currently using a spring loaded tool, which does make things a little better, but my depths across multiple pieces are inconsistent. Sometimes it is a heavier cut, and when the pieces are lined up the depth changes become very apparent.
    I have a Laguna IQ Pro.
    Is there any machine, or add-on that can track the changes in z height so that my letters are consistent?
    Any other ideas?

    Similar Threads:


  2. #2
    Member CitizenOfDreams's Avatar
    Join Date
    Nov 2012
    Location
    USA
    Posts
    817
    Downloads
    4
    Uploads
    0

    Default Re: tracking changes in z height of material.

    Check out Autoleveller, that's what I have been using for that purpose.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

tracking changes in z height of material.

tracking changes in z height of material.

tracking changes in z height of material.