You are probably better off to use a 3 wire cable with the handshake jumpered out at each end.
Al.
We have a hitachi seiki hicell 23b machine.
When attempting to transfer a program from a PC to the machine via a pc232 cable, an error “Line is busy” appears on the machine.
Help fix the problem. Photo error in the attachment.
Similar Threads:
You are probably better off to use a 3 wire cable with the handshake jumpered out at each end.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Has anyone figured out why I also am getting the “Line is busy” error. What does that really mean?
Used Hitachi Seiki CNC Lathe HITEC TURN 40G with SEICOS L3 controller
5000~5199 parameters are set properly and there seems to be no conflicts with port numbers and/or device IDs.
I have tried virtually every combination. I am stumped
Thank you anyone.