Originally Posted by
bryo14
Hello,
I am having trouble solving the excessive electric noise error on my Hitachi wj200. See attachments for pictures.
The shield is only grounded on the vdf side. I did this by exposing the shield, then i found a piece of 18awg wire stripped both side. On one side i rapped the stripped wire around the shield and used tape to hold it in place. On the other end i combined it with the spindle cable ground lead and screwed them both to the ground terminal in the VDF. see pic .....677 The yellow wire is the shield ground.
I did not ground the shield on the spindle side. see pic ...678
I used the ground wire from the spindle cable. To ground the spindle see pic ... spindle ground
pic ...423 shows the power connection. i used a 3 prong dryer cable. I did not use a power filter.
pic ...442 shows the spindle connection based on spindle plug wiring diagram pic.
Thanks