- Laser information
-
Registered
Laser information
Good morning,
I'm new in this forum.
I have a CNC 2018 with 500mW laser, hours I've got a 5W laser but I can not control it, it's always on.
The control board of the machine has the GRBL 0.9 software, can it be updated to GRBL 1.1?
I attach a new control card and laser photo.
Greetings to all
Thank you
Similar Threads:
-
-
Member
Re: Laser information
You can update to 1.1f. If it is not working better you can always go back to the previous version:
Steps to take:
- Get the old and the new firmware
- Retrieve all the settings and print the out
- update the firmware (Settings will be lost)
- Set the settings back
For more information, look at: https://github.com/gnea/grbl
-
Registered
Re: Laser information
[COLOR=rgba(0, 0, 0, 0.87)]Thanks for the reply,[/COLOR]
[COLOR=rgba(0, 0, 0, 0.87)]I'm not very prepared in programming.[/COLOR]
[COLOR=rgba(0, 0, 0, 0.87)]Can you tell me which files to replace or add to do this update?[/COLOR]
[COLOR=rgba(0, 0, 0, 0.87)]Thank you[/COLOR]
[COLOR=rgba(0, 0, 0, 0.87)]Greetings[/COLOR]
- Laser information
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules