adding a G13 /O9013 MACRO PROGRAM TO A FANUC Oi-MF CONTROL

[Babbleon2018]

Do you need to change a parameter setting to run this O9013 Macro Program when calling up a G13 in your program

O9013(G13 MACRO)
(I=#4)
(D=#7)
(F=#9)
(#13001+#7+ #12001+#7 READ CUTTER RADIUS)
#180=[#[13000+#7]+[#[12000+#7]]]
IF[#180GT#4]GOTO100(LEAD IN RADIUS)
#181=[#4-#180]/2
(CUTTING RADIUS)
#182=[#4]-#180
G91G3X#182Y0I#181J0R#181F#9
G3X0Y0I[#182*[-1]]J0
G3X[#182*[-1]]Y0I[#181*[-1]]J0R#181
G90
M99

Similar Threads:

• Fanuc macro b program advice
• Mori SL3 with Fanuc 3TF control (adding comments to program)
• Fanuc 0M-C Macro Program
• Testing program for Macro (Fanuc Macro B)
• Need Help!- Adding More RAM for A Fanuc Control