G173

Results 1 to 1 of 1

Thread: G173

  1. #1
    Registered
    Join Date
    Apr 2018
    Location
    Canada
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default G173

    Im having issues with my g173. When Mastercam posts out a G code . G173 W-5. i get " WARNING - Initial quill position must be more than clearance when W is used as Cut Axis "
    I need the neg 5. as a Pos 5. would be an over travel of the quil into the head. How do eliminate the warning
    This is my post that works but includes a warning each time

    G200
    (COMPENSATION TYPE - COMPUTER)
    M08
    T59 M06
    ( WARNING - Initial quill position must be more than clearance when W is used as Cut Axis )
    G100
    G173 W-5.
    (MAX - Z2.)
    (MIN - Z0.)
    G00 G17 G90 G54 X-46.202 Y11.3924 S700 M03
    G43 H59 Z0. W2.
    W.2
    G94 G01 W-3.. F28.

    Any Ideas would be helpful

    Similar Threads:
    Last edited by protechmachine; 04-25-2018 at 11:19 AM. Reason: tooling type


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

G173

G173