- G173
-
Registered
G173
Im having issues with my g173. When Mastercam posts out a G code . G173 W-5. i get " WARNING - Initial quill position must be more than clearance when W is used as Cut Axis "
I need the neg 5. as a Pos 5. would be an over travel of the quil into the head. How do eliminate the warning
This is my post that works but includes a warning each time
G200
(COMPENSATION TYPE - COMPUTER)
M08
T59 M06
( WARNING - Initial quill position must be more than clearance when W is used as Cut Axis )
G100
G173 W-5.
(MAX - Z2.)
(MIN - Z0.)
G00 G17 G90 G54 X-46.202 Y11.3924 S700 M03
G43 H59 Z0. W2.
W.2
G94 G01 W-3.. F28.
Any Ideas would be helpful
Similar Threads:
Last edited by protechmachine; 04-25-2018 at 11:19 AM.
Reason: tooling type
-
- G173
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules