Chiron fz08 toolchanger rebuilds?

Results 1 to 3 of 3

Thread: Chiron fz08 toolchanger rebuilds?

  1. #1
    Registered
    Join Date
    Mar 2017
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Chiron fz08 toolchanger rebuilds?

    Hi all,

    I've been trying to get my toolchangers for my Chiron fz08 w up and running, but most of them are acting sluggish or not even moving at all. I've looked at buying a replacement, but the only place I've found them is brand new from Chiron (they're also really expensive). Is there a rebuild kit I can buy or another way to fix them?

    Similar Threads:


  2. #2
    Member
    Join Date
    Mar 2008
    Location
    USA
    Posts
    580
    Downloads
    0
    Uploads
    0

    Default Re: Chiron fz08 toolchanger rebuilds?

    Is this the basket style?

    Check for bent arms. Lubricate the joints. They get gummy with certain coolants. Also, check the air pressure. They need a lot. Disconnect the actualtor from the arms and see if they are mechanically 'sluggish' or if the actuator is sluggish.

    I'm in the process of rebuilding one and if I give up and decide to scrap it let me know if you're interested in parts.



  3. #3
    Registered
    Join Date
    Mar 2017
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Chiron fz08 toolchanger rebuilds?

    Always interested in spare parts! Let me know how it turns out!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Chiron fz08 toolchanger rebuilds?

Chiron fz08 toolchanger rebuilds?

Chiron fz08 toolchanger rebuilds?