- Chiron fz08 toolchanger rebuilds?
-
Registered
Chiron fz08 toolchanger rebuilds?
Hi all,
I've been trying to get my toolchangers for my Chiron fz08 w up and running, but most of them are acting sluggish or not even moving at all. I've looked at buying a replacement, but the only place I've found them is brand new from Chiron (they're also really expensive). Is there a rebuild kit I can buy or another way to fix them?
Similar Threads:
-
-
Member
Re: Chiron fz08 toolchanger rebuilds?
Is this the basket style?
Check for bent arms. Lubricate the joints. They get gummy with certain coolants. Also, check the air pressure. They need a lot. Disconnect the actualtor from the arms and see if they are mechanically 'sluggish' or if the actuator is sluggish.
I'm in the process of rebuilding one and if I give up and decide to scrap it let me know if you're interested in parts.
-
Registered
Re: Chiron fz08 toolchanger rebuilds?
Always interested in spare parts! Let me know how it turns out!
- Chiron fz08 toolchanger rebuilds?
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules