- Camworks, UPG, EC Editor: Programming a tool list in Start of Tape
-
Registered
Camworks, UPG, EC Editor: Programming a tool list in Start of Tape
Hi,
I'm programming a post processor for my CNC machine in Camworks UPG program. I have the post together and working but I would like to have a list of all of the tools that run in the program in the Start of Tape section of the program. The post that Camworks supplied had that but didn't work properly so I'm writing my own post. I know that the EC Editor can do this, but the instructions are useless.
Does anyone know of or have an example of the code to do this?
The info is basically:
Line #, Tool #, Description of tool. And listing all of the tools used.
No motion involved, just information.
Any help would be appreciated.
Thanks,
Devin
Similar Threads:
-
-
Member
Re: Camworks, UPG, EC Editor: Programming a tool list in Start of Tape
Hi
I am using camworks but I want to modify some post processor in order to use my FANUC alfa1C wire EDM.
Do you have a tutorial or something to my request?
Thanks in advance
- Camworks, UPG, EC Editor: Programming a tool list in Start of Tape
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules