Hi guys! I hope all of you are having a fantastic day! I used to read a few things here and there about cnc machines i general but never got to take the time to join in! Glad I did a I see a great sense of camaraderie! Cheers!
Great Find, Welcome!
Hi guys! I hope all of you are having a fantastic day! I used to read a few things here and there about cnc machines i general but never got to take the time to join in! Glad I did a I see a great sense of camaraderie! Cheers!
Newbie here from Finland. Studying wood engineering. Just ordered hardware for 1st cnc-machine.
Hello everyone. New guy here. I am a non-destructive testing inspector by trade and do a lot of gunsmithing. I am from Frankford, On Canada
I have a 13x40 Enco Lathe and a Craftex Ct129 small mill.
I found this forum looking for info on converting my mill to cnc. I hope to start this project this winter, as soon as I find some drawings.
GST
Hello, Just bought my first CNC mill and really like the forum, seems like alot of great info- can't wait to participate
Just bought an older IH6000 4 axis CNC (RF-45). Also have a candcnc controlled precision plasma table with a router on it at the moment. Figured I would make an account as I am considering updating some of the electronics in the mill.
thanks for adding me I'm omer from Iraq
Howdy,
Going to build my own CNC plasma table. Signed up so I can do some research, and eventually ask questions when I get stumped. Search button should keep me busy for quite awhile.
Thanks
Hello everybody
<this is my construction and is currently in work. Any remarks, suggestions are welcome.
Hi All Guys!
Looking info about CNC built
Matteo
Hello, Brazillian, 25 yrs old.
I'm a hobbyist/work with 3D printing. I'm getting deeper in the hacking of the system xD Trying to learn some tricks to edit G-codes.
Hi,
I'm newbie CNC router work. I have working on 1325 3axis cnc machine.
Hello guys, I have been using a small 3 axis router cutting 2d parts for work. I'd like to lear to write cam for 3d models so I can cut them by doing 2 setups, reversing the work=piece. Also Id' like to make female half-mods for parts to be laminated with fiberglass... I am going to need some time to learn all this, don't quite know where to start from. I did download Fusion 360 a few days ago, and maybe that is a good start, going from the model to the cam though will be tough...
Just looking for some great knowledge, Hi Everyone!!
Hello all I am a CNC Operator just landed a job working on a lathe. This new job I have to do setup,I never done any setup so learning as I go. I have a question regarding using G54 as your master tool so it can save time on setups? If someone can tell me how that work I would definitely appreciate it.
Thank you
I signed up to make a post because someone was questioning credibility for 'lack of posts'.
Hi.
I'm Robert from Hungary. I'm newbie but I try to build a CNC.
Thank you for your help.
Thanks for accepting me I'm from the North Pole in Upper Michigan. Lol
I have a 4x8 CNC ROUTER Parts machine with jtech 7 watt laser. I cannot figure out how to eliminate the dots in laser engravings.
Hello,
I am just a newbie looking for some info.
Hello Everyone! My name is Tom and I recently moved into a new role at a startup that offers a continuous improvement solution to job shops/Manufacturers. So far I've been having a great time learning about this industry and trying my best to understand the challenges that CNC operators face on a daily basis. As someone who has a background in PCB manufacturing, its awesome that I have the opportunity to learn more about CNC machines.
Amper: Affordable Real-time Machine Monitoring
No PLC/IT Integration Required https://www.getamper.com