MIYANO BND34S2 PROBLEM

[JOCEL-OGINO]

Please help me to remove machine alarm!! This is a Fanuc series OT machine.
While on line production, machine stopped and machine alarm indicator lit on, we already done these items:
1. check turret - ok
2. check sensor - ok
3. machine movement - ok
4. Check diagnostic data
dgn 300
0 0 0 0 0 0 0 1
status:
0 bit must be 0, then there is alarm 1, according to manual it is main turret servo unit alarm. How to resolve this problem? what part need to change

Similar Threads:

• Need Help!- Miyano BNC-34t turret problem
• Miyano FSV-21, ATC problem
• Need Help!- MIYANO BND34S2 PROBLEM
• Miyano T5V-25 problem.
• Miyano parameter Problem

[mrafitraders]

Please help me to remove machine alarm!! This is a Fanuc series OT machine.
While on line production, machine stopped and machine alarm indicator lit on, we already done these items:
1. check turret - ok
2. check sensor - ok
3. machine movement - ok
4. Check diagnostic data
dgn 300
0 0 0 0 0 0 0 1
status:
0 bit must be 0, then there is alarm 1, according to manual it is main turret servo unit alarm. How to resolve this problem? what part need to change

Dear Sir, I trust you are well. I recently import same Miyano BND34S2 with C axis and subspindle Fanuc OT from UK. There is no Macro programs in the machine and no manual received with the machine. Can you please help me in this regard? I need to have machine M code list plus Macro programs for C axis and live tools. Thanks in advance. Stay blessed.