2 Attachment(s)
FEMCO Durga 25-E Parameters and Diagnostic Fanuc O-TC
Hello everyone,
I have received a PM from cnczone member "sinad" asking for a copy of my parameters off my FEMCO Durga 25-E
I thought id post them here in case anyone who wants them can freely grab a copy. It's very useful to have the FANUC manual handy so you can read what each parameter is and what each parameter value does.
But any way, Here is my most recent copy uploaded out of my working Fanuc O-TC FEMCO Durga 25-E Parameters and Diagnostic.
Hope a google search will eventually steer those who need it to this post.
Cheers,
Chich
Re: Lathe in it's final resting place.
Hello Fellow Femco Durga 25E Owner
Im here in the States,located in Dallas North Carolina.
I just ran across your posts from when you started to set up your Femco Durga 25E a while back
We purchased one as well brand new in 98' and its worked good for us
Ours is getting pretty worn now after so many years and so many operators taking its
toll on our girl.....
My thoughts ,,,,, just curious What is the thought behind placing your Femco on a stand.
Never seen that done before...
Im still going thru your posts look forward to reading them all when I get a moment to myself.
Hope its working well for you
CNCWayToGo