CAD drawings of most popular V8 engine bellhousing patterns

[archangel]

They all should be on my Photobucket, but I see some are missing.

The tower we use is infected and until it gets fixed, (a few weeks) I cant get to them.

Pictures by archangel2003 - Photobucket

I will post anything else I have when I can.

Also, can anyone who has blueprints also post them in photobucket and list the address here so we can all share?

[monc440]

They all should be on my Photobucket, but I see some are missing.

The tower we use is infected and until it gets fixed, (a few weeks) I cant get to them.

Pictures by archangel2003 - Photobucket

I will post anything else I have when I can.

Also, can anyone who has blueprints also post them in photobucket and list the address here so we can all share?

Angel

This is what I have - Early Chry, Dodge. Desoto, Hemi blocks 1951 to 1959.

I still need LA Mopar 273, 318, 340, & 360 bellhousing specs. Would also like big block 383, 400, 413, 426, & 440 bellhousing specs.

I think the Newer Dodge 4.7L bellhousing pattern is the same as the LA Mopar

Thanks

[monc440]

Found these yesterday.

[accelrate]

...

I also have some nice drawings of 4 and 5 cylinder Volkswagen TDI Diesels.

...

PM'd, If you could please send these to me, thanks.

Also if anyone has a drawing of the V6 from the A4, that'd be awesome as well.

[RB1]

Hey guys,

I am looking for the Ford Y block (for a ~ '56 312CID) bellhousing bolt pattern CAD drawing, or print...

Anyone have a lead there?

Also, Archangel, what is that ford pattern, on your link... is that a later model 302? Just says FORD PATTERN as far as I could see.

thanks alot!

[Kevin Taylor]

The ford drawing look's like a 302 also would be 300/6 and clevland and windser The big mopar is in the D.C. Bible I will have to look for it as for the big ford FE? 390/428 or Lima /429/460 I have ford print's for the 460 but takes a little siffering to go off of the main center 0/0 is off in space always on the blue oval print's. Will try to help I would also like to find the old Y block and FE print's I had the name of a guy at transdapt I may be able to contact for some help. Found the big mopar but could not attach it Kevin

[Sebastian-2012]

Hi Guys,


I am looking for the BMW 4-cylinder DIESEL bellhousing bolt pattern CAD drawing, or print.

Model: E 46
Engine: 320d

I plan to connect a Chevy Small-Block (Gen. I = up to 1085) with a BMW 6-Speed-transmission by using a adapterplate.

So I´am looking for a CAD drawing of the Chevy bellhousing bolt plattern too. I´ve found already a picture here, but would apreceate if someone could send other/more drawings.

I´am not so mad to hope, that some had already build such a adapter plate, but if -- that would be GREAT to get the used CAD-file.


Thanks

Sebastian

[RB1]

Hi Kevin,

I know that I have the FE pattern that I got from dialing in the locations on my mill with a DRO. I made a plate for some obscure ford engine (it was a 352 maybe?? sorry) I had to mount up back around 2007. I will PM you my email address and if you pester me I can come up with something in the next week or so.

As far as the SBC pattern, yes it is pretty easy to find in a manual called the POWER BOOK that GM used to print. I have seen scanned pages in many google searches so you may try that avenue. In fact yesterday in my Y block google search I came across the SBC ones somewhere....

[RB1]

Sebastian,

Does anyone have blueprints of a Chevy bell housing or dowel pin location? - THE H.A.M.B.

you will not find the power book one here, but the chevy pattern is on this page.

[MAGIHC]

Since the hunt is on, has anyone got IH straight 6 cyl Bell housing drawings from the 50s. Looking for GRD 213, truck model KB 1945-49. Same for the SD/BD-220 to 264, BD 269 to 308? Truck models L, R, and S from 1950-57
I would also like the Adapter drawing for 1958 and newer straight 6 IH that fit the BD240, or 264 to the next gen bell housings of that same year range The truck model would be A-XXX, B-XXX, and C-XXX
Thanks, M

[jamesbissland]

G'day from NZ!!

Just wonderings if anyone has or knows of any bellhousing bolt pattern files or drawings for a 2.0 or 2.3L Ford Duratec 4 cylinder engine?

I would really appreciate some help!!!

Many thanks in advance
James

james.bissland@ihug.co.nz

[DavidASmith072]

Found these yesterday.

That first drawing that your posted a while back isn't quite correct. While the bolt holes dimension locations are correct, the drawing of the bellhousing is tilted upward. Can someone who has an actual Mopar bellhousing draw the bellhousing the correct way to dimension from?

Thank you,

David