help on the way with the cube
Your cubes seems pleasant to make. I do not find the original estimate, how do I do this? I think of the circles size relative to depth.
Is there a complete G-code to a size of about 75-50mm.
would be fun to try the steel before I buy home acrylic.
I'm lazy because I'm over fifty years old
Re: Making Large "Turner's Cubes" on an Engine Lathe
Wow, It's been a long time sense I've posted on this thread!
So here is a little update!
Many of my friends have been asking me to make more of the tiny Turner's Cubes, so I squared up a bunch of scrap plastic stock and dug up the old fixture! These cubes are .7500" x .7500" x .7500" Delrin.
www.widgitmaster.com
It's not what you take away, it's what you are left with that counts!
Re: Making Large "Turner's Cubes" on an Engine Lathe
Holy cr4p!
Super X3. 3600rpm. Sheridan 6"x24" Lathe + more. THREE ways to fix things: The RIGHT way, the OTHER way, and maybe YOUR way, which is possibly a FASTER WRONG WAY!
Re: Making Large "Turner's Cubes" on an Engine Lathe
Sorry I woke you NeilOriginally Posted by neilw20
Holy cr4p!
Widgit
Re: Making Large "Turner's Cubes" on an Engine Lathe
That's OK. Daylight saving just finished so the clocks are fixed but the brain is still adjusting. I will make some cubes, one day, when I find some time.
Super X3. 3600rpm. Sheridan 6"x24" Lathe + more. THREE ways to fix things: The RIGHT way, the OTHER way, and maybe YOUR way, which is possibly a FASTER WRONG WAY!
Re: Making Large "Turner's Cubes" on an Engine Lathe
Here is a better video!
Re: Making Large "Turner's Cubes" on an Engine Lathe
J8
Reply with Quote
