Need Help! Tripple start thread in hole tapping problem


Results 1 to 2 of 2

Thread: Tripple start thread in hole tapping problem

  1. #1
    Member
    Join Date
    Sep 2017
    Location
    Pakistan
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Tripple start thread in hole tapping problem

    I am not able to do tapping every time tap breaks when i do on daweoo mill while rigid tapping parameter is active on machine Tap parameters are following
    3start Tap pitch 0.181inch Lead=0.543 major diameter is 0.5inch I am using floating holder and depth of tap in z axis is 1.25 inch any help would be higly appreciated
    thanks

    Similar Threads:


  2. #2
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    5242
    Downloads
    0
    Uploads
    0

    Default Re: Tripple start thread in hole tapping problem

    Is the tap drill correct for the thread and material? Maybe too small?

    Jim Dawson
    Sandy, Oregon, USA


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Tripple start thread in hole tapping problem

Tripple start thread in hole tapping problem

Tripple start thread in hole tapping problem