How can I connect er11 collect to a spindle that support er20 collect


Results 1 to 8 of 8

Thread: How can I connect er11 collect to a spindle that support er20 collect

  1. #1

    Default How can I connect er11 collect to a spindle that support er20 collect

    I wish to mill a PCB using a high precision er11 collect but my CNC has a 2.2Kw spindle which only accept er20 collects. I tried to find an adaptor for this but could not find any. Any suggestions?

    Similar Threads:


  2. #2
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    3517
    Downloads
    0
    Uploads
    0

    Default Re: How can I connect er11 collect to a spindle that support er20 collect

    hy suspension, craft another shaft, with an er 11 chuck, then replace it using an adaptor will lead to more tir & overhang

    if you wish, i can help you with specific details / kindly

    - parameter's value doesn't matter, what matters is consistency
    - you can reduce cycle time not by reducing it, but by reducing it's uncertainty


  3. #3
    Member
    Join Date
    Apr 2004
    Location
    Oakland CA USA
    Posts
    5419
    Downloads
    0
    Uploads
    0

    Default Re: How can I connect er11 collect to a spindle that support er20 collect

    The added precision gained by using a better collet will be lost by using an adapter, as deadlykitten is telling you above. Just find the right-sized ER20 collet for your PCB tool and use that.

    Andrew Werby
    https://computersculpture.com/


  4. #4
    Member
    Join Date
    Jan 2005
    Location
    USA
    Posts
    13122
    Downloads
    0
    Uploads
    0

    Default Re: How can I connect er11 collect to a spindle that support er20 collect

    Quote Originally Posted by suspension View Post
    I wish to mill a PCB using a high precision er11 collect but my CNC has a 2.2Kw spindle which only accept er20 collects. I tried to find an adaptor for this but could not find any. Any suggestions?
    There is no such adaptors, that I have ever seen, apart from a straight shank ER Collet holder, which you would not want to use in the ER20 Spindle, there would be no need for one. what ever size you want you can get it in the ER20 Size collet, with just the same precision, as the ER11.

    Mactec54


  5. #5
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    3517
    Downloads
    0
    Uploads
    0

    Default Re: How can I connect er11 collect to a spindle that support er20 collect

    is there interference with the er20nut, while 11 may make it ? instead of other size, maybe is enough to use a smaller nut

    - parameter's value doesn't matter, what matters is consistency
    - you can reduce cycle time not by reducing it, but by reducing it's uncertainty


  6. #6
    Member
    Join Date
    Jan 2005
    Location
    USA
    Posts
    13122
    Downloads
    0
    Uploads
    0

    Default Re: How can I connect er11 collect to a spindle that support er20 collect

    Quote Originally Posted by deadlykitten View Post
    is there interference with the er20nut, while 11 may make it ? instead of other size, maybe is enough to use a smaller nut
    When this happens you can just machine up a solid tool holder to fit what ever ER holder you have, to give the amount of clearance you need, I Loctite the cutter into the holder, you can buy these also, they are easy to make yourself though.

    Attached Thumbnails Attached Thumbnails How can I connect er11 collect to a spindle that support er20 collect-solid-er-tool-holder-png  
    Mactec54


  7. #7
    Member
    Join Date
    Mar 2017
    Location
    United States
    Posts
    906
    Downloads
    0
    Uploads
    0

    Default Re: How can I connect er11 collect to a spindle that support er20 collect

    They make screw-on adapters to go bigger and smaller e.g.

    https://www.ebay.com/itm/15422087603....c101113.m2108

    And

    https://www.ebay.com/itm/35371366647...cAAOSwpOthYEMX

    I don't know how small the end mill is but can't you just use a stepped end mill with a larger shank like this:

    https://www.ebay.com/itm/33417734199...3ABFBMlKGbnZxf

    Or V shape bits with a 1/8" shank and a 0.1mm tip:

    https://www.ebay.com/itm/18510926519...UAAOSwzNRhal0N

    I can't imagine any sort of adapter adding precision....



  8. #8
    Member MCImes's Avatar
    Join Date
    Sep 2011
    Location
    United States
    Posts
    261
    Downloads
    0
    Uploads
    0

    Default Re: How can I connect er11 collect to a spindle that support er20 collect

    Your best bet is to get an ER-20 Ultra Precision collet if you have a tool with at least a 2mm shank (the smallest ER20 goes I think?). A reducer doesnt provide any real benefit I can see here.
    https://us.rego-fix.com/en/products/...ions?system=ER

    But if you need more length for some reason, the regofix reducers linked above will take you down 1 size. I thought they went down more sizes than that, but dont see them in their current product list.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

How can I connect er11 collect to a spindle that support er20 collect

How can I connect er11 collect to a spindle that support er20 collect

How can I connect er11 collect to a spindle that support er20 collect