Tap for Hot Dipped Galvanized 5/8-11 bolt?
Member
Tap for Hot Dipped Galvanized 5/8-11 bolt?
Hi!
I'm going to tap some A36 steel for a 5/8" 11 Hot Dipped Galvanized bolt.
I know I need an oversized tap. I've googled and all the documentation I found refers to tapping it .02" oversize.
But all the oversize taps I can find are .005" oversize.
Am I missing something here? Thanks!
-J Similar Threads:
Member
Re: Tap for Hot Dipped Galvanized 5/8-11 bolt?
Hi,
have you thought of using a thread mill?
Craig
Member
Re: Tap for Hot Dipped Galvanized 5/8-11 bolt?
Thread milling would work, but I figure it would be much more expensive, and there has to be a better way. Millions of galvanized nuts get made each year!
Tap for Hot Dipped Galvanized 5/8-11 bolt?
Tags for this Thread
Posting Permissions
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
Forum Rules