How to make/cut an inner guide on aluminium pipe - suggestions


Results 1 to 2 of 2

Thread: How to make/cut an inner guide on aluminium pipe - suggestions

  1. #1
    Member
    Join Date
    Jun 2013
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default How to make/cut an inner guide on aluminium pipe - suggestions

    Hi to everyone. I am real newbie and I need help on deciding how to cut inner guide on an aluminum pipe (D80, 5mm wall thickness). I need three inner cuts to be straight all through the pipe (lengths of 2, 3 or 5 meters).

    Cut is 1mm deep.

    I was thinking to use another thinner pipe and a brute force with some cutters mounted on it. For example D70 pipe to cut D80 one. Will it work? Or something similar?

    Thanks to everyone for suggestions. Hope this is a right place to ask something like this..

    How to make/cut an inner guide on aluminium pipe - suggestions-pipe1-jpg

    Goran

    Similar Threads:


  2. #2
    Member djr76's Avatar
    Join Date
    Nov 2007
    Location
    automation alley
    Posts
    474
    Downloads
    0
    Uploads
    0

    Default Re: How to make/cut an inner guide on aluminium pipe - suggestions

    Look into broaching.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

How to make/cut an inner guide on aluminium pipe - suggestions

How to make/cut an inner guide on aluminium pipe - suggestions

How to make/cut an inner guide on aluminium pipe - suggestions