Surfacing 7075 plate, recommendations?


Results 1 to 4 of 4

Thread: Surfacing 7075 plate, recommendations?

  1. #1

    Default Surfacing 7075 plate, recommendations?

    Hello there!

    Wondering if someone could give me some guidance. I'm designing two parts for a CNC router which I'm planning to get machined, I haven't chosen a manufacturer yet.

    They measure

    400mm x 217.5mm x 25-30mm
    250mm x 265 x 25-30mm

    In anyone's opinion, would a surfacing cut of 0.5mm cause any distortion in those plate sizes? How light a cut could I get done while still giving a consistent finish on stock 7075 plate?

    Cheers



  2. #2
    Member mactec54's Avatar
    Join Date
    Jan 2005
    Location
    USA
    Posts
    15362
    Downloads
    0
    Uploads
    0

    Default Re: Surfacing 7075 plate, recommendations?

    Quote Originally Posted by JustinP1 View Post
    Hello there!

    Wondering if someone could give me some guidance. I'm designing two parts for a CNC router which I'm planning to get machined, I haven't chosen a manufacturer yet.

    They measure

    400mm x 217.5mm x 25-30mm
    250mm x 265 x 25-30mm

    In anyone's opinion, would a surfacing cut of 0.5mm cause any distortion in those plate sizes? How light a cut could I get done while still giving a consistent finish on stock 7075 plate?

    Cheers
    It would depend on the material you use, 7075 can be processed in different ways cast is best for plates which gives you less distortion for machining a plate like this, it should be Blanchard Ground, or double disc Ground, you could just buy it already Ground also

    If you want it better than .005" then you would mount it to your machine base if it is not the moving part, and then have it surfaced

    Mactec54


  3. #3

    Default Re: Surfacing 7075 plate, recommendations?

    Thanks Mactec54,

    Cast ground 7075 plate might be the way to go



  4. #4
    Member mactec54's Avatar
    Join Date
    Jan 2005
    Location
    USA
    Posts
    15362
    Downloads
    0
    Uploads
    0

    Default Re: Surfacing 7075 plate, recommendations?

    Quote Originally Posted by JustinP1 View Post
    Thanks Mactec54,

    Cast ground 7075 plate might be the way to go
    That is what most use, also known as cast tooling plate, there are companies that will grind the plate also

    Mactec54


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Surfacing 7075 plate, recommendations?

Surfacing 7075 plate, recommendations?