Machine to cut stainless tube


Results 1 to 2 of 2

Thread: Machine to cut stainless tube

  1. #1
    Member
    Join Date
    Nov 2014
    Posts
    34
    Downloads
    0
    Uploads
    0

    Default Machine to cut stainless tube

    what is the most suitable machine to cut stainless steel, without burr or discoloring?

    I tried e*******n , m****a brand cold saw, but the bits chipped after few usage , so I am thinking about using low rpm cold saw or bandsaw.

    I cut mostly 50mm x50mm tube , 1.5mm thick

    Similar Threads:


  2. #2
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    5717
    Downloads
    0
    Uploads
    0

    Default Re: Machine to cut stainless tube

    We tried to use our Evolution metal cutting chop saw with the recommended blade for SS and found that it did not work well. The blades dulled or lost teeth too fast. They will cut aluminum all day long, no problem.

    We went back to our horizontal band saw for cutting stainless. With the thin wall of your tube, a M42 cobalt bi-metal blade, about 14TPI would work well.

    Jim Dawson
    Sandy, Oregon, USA


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Machine to cut stainless tube

Machine to cut stainless tube