CNC LATHE TURRET INDEX SWITCH

[rajesh5000]

Hi there ...Iam looking for a turret index switch for my cnc lathe machine but i dont know what its called or where i can buy it from ...PLZZZ help me find this switch ...below is the picture of the switch ..the machine is stopped because of this switch ...




Similar Threads:

• Problem- turret index issue
• Problem- Turret Index error at Tsugami lathe
• Fanuc Oi-Tc Turret Mis Index(A0.3)
• Need Help!- Hitachi HT 20 CNC Lathe "turret index time over alarm" after battery change
• Need Help!- LNC-8C (Cadet lathe) turret index

[cncmakers001]

Hi there ...Iam looking for a turret index switch for my cnc lathe machine but i dont know what its called or where i can buy it from ...PLZZZ help me find this switch ...below is the picture of the switch ..the machine is stopped because of this switch ...

What is the CNC controller model name, the switch has no model name on it.

[RCaffin]

It's an Alpha Rotary Switch, single pole 12 position.
Quite a few distributors carry them for a few dollars each. First hit I got was Mouser.
You may need to trim the terminals, and in fact to check the pin circle diameter as well.

Cheers
Roger