please, how do you check the excentricity for turning tools ? ( cnc, tilted saddle )


Results 1 to 5 of 5

Thread: please, how do you check the excentricity for turning tools ? ( cnc, tilted saddle )

  1. #1
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    2679
    Downloads
    0
    Uploads
    0

    Default please, how do you check the excentricity for turning tools ? ( cnc, tilted saddle )

    hello, i recently setup some small parts on a 250mm chuck, and for few operations i use gang/small tools; i have to align them on center pretty well, because they are fragile

    i also noticed that 25mm shank tools do have the cutting edge at height 25±0.25, while i was expecting 25±0.1

    please, how do you check the alignment, besides cutting a face ? i mean do you use a faster method, which does not involve cutting ? like attached things ? do you know what is their precision, are they reliable ?

    image 01 : requires to have cilindrical jaws at a certain position, in order to clamp the device; such jaws should clamp without tir, at least where the bubble is located ( = downtime with jaws preparation, and jaws set-up; is faster to face-cut )
    image 02 & 03 : are not for bent sleighs, but for horizontal

    kindly

    Similar Threads:
    Attached Thumbnails Attached Thumbnails please, how do you check the excentricity for turning tools ? ( cnc, tilted saddle )-01-jpg   please, how do you check the excentricity for turning tools ? ( cnc, tilted saddle )-02-jpg   please, how do you check the excentricity for turning tools ? ( cnc, tilted saddle )-03-jpg  
    Last edited by deadlykitten; 05-12-2019 at 08:39 AM.
    Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg


  2. #2
    Member Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    3344
    Downloads
    0
    Uploads
    0

    Default Re: please, how do you check the excentricity for turning tools ? ( cnc, tilted saddl

    I use a 0.625'' dowel pin in the chuck or collet. Measure the tool height with a height gauge, measure the station height with gauge blocks, subtract the difference and add the pin radius, and that is the required shims to put the tool point on the spindle center line.

    Then I store the dimensions on the computer with this screen in my program. Inputting the tool height and station height and clicking Apply calculates the required shims.

    please, how do you check the excentricity for turning tools ? ( cnc, tilted saddle )-tool-heights-setup-jpg

    Attached Thumbnails Attached Thumbnails please, how do you check the excentricity for turning tools ? ( cnc, tilted saddle )-tool-heights-setup-jpg  
    Jim Dawson
    Sandy, Oregon, USA


  3. #3
    Member
    Join Date
    Mar 2015
    Location
    Netherlands
    Posts
    219
    Downloads
    0
    Uploads
    0

    Default Re: please, how do you check the excentricity for turning tools ? ( cnc, tilted saddl

    I found this on the internet and made one myself. If the lathe is horizontal, it works like a dream,
    please, how do you check the excentricity for turning tools ? ( cnc, tilted saddle )-toolheigthcheck-jpg

    Attached Thumbnails Attached Thumbnails please, how do you check the excentricity for turning tools ? ( cnc, tilted saddle )-toolheigthcheck-jpg  


  4. #4
    Member
    Join Date
    Nov 2017
    Location
    United States
    Posts
    370
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by hfjbuis View Post
    I found this on the internet and made one myself. If the lathe is horizontal, it works like a dream,
    please, how do you check the excentricity for turning tools ? ( cnc, tilted saddle )-toolheigthcheck-jpg

    Interesting. Actually not limited to horizontal x travel. Could be designed to account for slant bed if you know the exact angle. I think I'll make one for my mill turn setup which has vertical x travel when turning. The bubble level just needs to be horizontal when the stop is resting on the tool tip. Luckily for me, I don't need to trial and error with shims. Jog it in to level with 3rd axis



  5. #5
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    2679
    Downloads
    0
    Uploads
    0

    Default Re: please, how do you check the excentricity for turning tools ? ( cnc, tilted saddl

    Could be designed to account for slant bed
    yes, i could craft one, but i wish to buy it / kindly

    Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

please, how do you check the excentricity for turning tools ? ( cnc, tilted saddle )

please, how do you check the excentricity for turning tools ? ( cnc, tilted saddle )