Help with Slater Rotary Broach Holder. Replacing bearings (kit)


Results 1 to 2 of 2

Thread: Help with Slater Rotary Broach Holder. Replacing bearings (kit)

  1. #1
    Member
    Join Date
    May 2012
    Location
    usa
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Help with Slater Rotary Broach Holder. Replacing bearings (kit)

    Hi.
    We have a Slater rotary broach tool holder that the bearings seized up. We ordered the replacement kit. We can't get the holder apart to replace the bearings. They said there was no special tool. Anyone know how to take the holder apart?

    Thanks

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jun 2018
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Help with Slater Rotary Broach Holder. Replacing bearings (kit)

    Quote Originally Posted by pfmn95492 View Post
    Hi.
    We have a Slater rotary broach tool holder that the bearings seized up. We ordered the replacement kit. We can't get the holder apart to replace the bearings. They said there was no special tool. Anyone know how to take the holder apart?

    Thanks
    Hey
    Some Slater Rotary Broach tool holders have screws that hold them together, if yours is one of those then you can get a suitable screw driver to open it up.
    If it has no visible screws then I will advise that you take it to a technician to help you open it up.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Help with Slater Rotary Broach Holder. Replacing bearings (kit)

Help with Slater Rotary Broach Holder. Replacing bearings (kit)