Share Your Files Part or Art

[Kevin44]

Hi everyone - Anyone have a DXF files for a Gibson Guitar .
A friend wants the Gibson guitar and logo engraved on a plate .
So it's nothing to critical .

Thanks for any help

[jalessi]

Hi everyone - Anyone have a DXF files for a Gibson Guitar .
A friend wants the Gibson guitar and logo engraved on a plate .
So it's nothing to critical .

Thanks for any help

Hopefully you want the current logo, I believe it has gone through several renditions over the years.

Jeff...

[stuartmeyer]

Not a DXF but vector PDF, Gibson logo is on the head of the guitar (not to sure if has attatched to this post)

Stuart

[ajarn al]

Here is a 335 which was posted previously.

[ryke]

Would anyone want to convert this?

[fragar]

Would anyone want to convert this?

Here you are, to low resolution on picture, made a new dxf file.

[arturo87]

can someone help me convert this to dxf 17.5" h x 96" L
and the plate 27.5" dia

[danialsan]

Hope these will work for you. Had to zip one because of it's size.
Dan

[ryke]

I messed up and posted the wrong target, and just realized it, could i get this one converted to a dxf also thanks

[Blackadder]

I messed up and posted the wrong target, and just realized it, could i get this one converted to a dxf also thanks

Try this for size

[tatinc2000]

Anyone have an oak tree with a swing hanging from it? A friend is looking for cribbage boards made from the tree that his daughters played in when they were little.

[urbnsr]

I messed up and posted the wrong target, and just realized it, could i get this one converted to a dxf also thanks

Hope you find this useful. Took longer for the reply page to come up than it took to convert it!:

[ryke]

thanks guys

[Kevin44]

Hi Everyone - Could I please get a DXF file for this Logo .
All I need is a DXF of Brentreg Construction and the loader
if possible . I don't need the numbers or basement sewer and water .

Thanks for all the help .

[urbnsr]

Hi Everyone - Could I please get a DXF file for this Logo .
All I need is a DXF of Brentreg Construction and the loader
if possible . I don't need the numbers or basement sewer and water .

Thanks for all the help .

See if this will work for a start.

[Kevin44]

Thanks a lot urbnsr . Let me no if I'm able to help
you with anything . Thanks again .

[urbnsr]

Hey - You're very welcome Kevin44. Thanks...

Paul

[J. Marti]

Can anybody do a dxf of this for me.

[danialsan]

Marti,

Try this one.

Dan

[J. Marti]

Danialsan

Thank you so much.