Need Help! Cast heat resistance stainless material cutting

Results 1 to 3 of 3

Thread: Cast heat resistance stainless material cutting

  1. #1
    Member Bennylad's Avatar
    Join Date
    Apr 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Cast heat resistance stainless material cutting

    Hello,
    I'm having trouble turning (Cast heat resistance 25cr - 20ni stainless steel per idm - 8393.) This material has a high crome and nickel content. The problem I'm having is keeping consistency with the tight dimentions has anyone had any experience cutting this stuff? Any advice at all will be appreciated.
    Thanks.


    Sent from my SM-G950F using Tapatalk

    Similar Threads:
    Last edited by Bennylad; 09-05-2019 at 12:56 PM.


  2. #2
    Member
    Join Date
    Aug 2015
    Posts
    108
    Downloads
    0
    Uploads
    0

    Default Re: Cast heat resistance stainless material cutting

    Try Mitsubishi inserts. VP10RT is the grade we used to cut Inconel. I would stay with inserts in the S group for heat resistant alloys.

    We made a tight tolerance bushings on a ST10 and the finishing inserts lasted maybe 10 - 20 parts before they wore out. The roughing inserts lasted 5 - 10 parts, but Inconel has a much higher nickel content than what you're turning.



  3. #3
    Member Bennylad's Avatar
    Join Date
    Apr 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Cast heat resistance stainless material cutting

    Thanks for the info. Did you run without coolant that was something that was suggested also I take it you had a low spindle speed.
    Regards,

    Sent from my SM-G950F using Tapatalk



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Cast heat resistance stainless material cutting

Cast heat resistance stainless material cutting