Help! Rudia 6442g upgrade on Omtech K40 original power supply
I can not get the wiring correct from a Rudia 6442G to a JG-40w transformer with the K+ & K- connectors as well as the N+- connectors. I also got stepper motor control boxes #542 and an additional transformer for the control board and stepper drivers. And have it set up as a DSP.
Also, the stepper motors will not move more than about 3 inch one way and won’t return.
Changed from a Linihu M2Nano board to the 6442.
Can anyone help me with this, I am pulling my hair out…