Need Help! How can I cut aluminum foil?


Results 1 to 15 of 15

Thread: How can I cut aluminum foil?

  1. #1
    Member jmmiller1990's Avatar
    Join Date
    Oct 2021
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default How can I cut aluminum foil?

    This is my first post here. I work where we use many small circular aluminum pieces. They have a smaller half circle cut out of one side of it (see attached image). These things are expensive and only available from the manufacturer. They are $700 for a pack of 300 small pieces of aluminum foil. We have been able to find a suitable aluminum foil for our needs. Is there a way to cut aluminum foil with some sort of laser engraver or cutting machine? If so, what would be the best one for my needs? I am new to this world, but I have some working knowledge of a CNC machine.

    For clarification, the OD is 37mm and the ID is roughly 32mm.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails How can I cut aluminum foil?-foil-jpg  


  2. #2
    Member Halfnutz's Avatar
    Join Date
    Feb 2005
    Location
    USA
    Posts
    750
    Downloads
    0
    Uploads
    0

    Default Re: How can I cut aluminum foil?

    Maybe try having a die made so they can be stamped out with a press?

    Halfnutz


  3. #3
    Member peteeng's Avatar
    Join Date
    Jul 2018
    Location
    dum dum
    Posts
    6257
    Downloads
    0
    Uploads
    0

    Default Re: How can I cut aluminum foil?

    Hi JMM - As 1/2 nut says a clicking press and a die knife will do a fine job for that part. Otherwise a local laser company would do it easy. What is the foil thickness? If you try to machine it, holding it will be the issue, will need to be a vacuum clamp of some sort. Laser is the go or a die knife. Peter



  4. #4
    Member awerby's Avatar
    Join Date
    Apr 2004
    Posts
    5728
    Downloads
    0
    Uploads
    0

    Default Re: How can I cut aluminum foil?

    You can get aluminum foil in stacks of sheets as well as on rolls. An abrasive water-jet cutter could cut that shape out of the whole stack at once, giving you multiple pieces, Nesting the cuts should give you at least $700 worth, for a fraction of the cost.

    [FONT=Verdana]Andrew Werby[/FONT]
    [URL="http://www.computersculpture.com/"]Website[/URL]


  5. #5
    Member jmmiller1990's Avatar
    Join Date
    Oct 2021
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: How can I cut aluminum foil?

    The foil thickness is 0.001" or 25 um. If I were to use a laser, do you know what type of laser, wavelength, and what laser power would be best?



  6. #6
    Member jmmiller1990's Avatar
    Join Date
    Oct 2021
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: How can I cut aluminum foil?

    I have not heard of a water-jet cutter. I will look into that. Thanks!



  7. #7
    Member mactec54's Avatar
    Join Date
    Jan 2005
    Location
    USA
    Posts
    15362
    Downloads
    0
    Uploads
    0

    Default Re: How can I cut aluminum foil?

    Quote Originally Posted by awerby View Post
    You can get aluminum foil in stacks of sheets as well as on rolls. An abrasive water-jet cutter could cut that shape out of the whole stack at once, giving you multiple pieces, Nesting the cuts should give you at least $700 worth, for a fraction of the cost.
    This could not be done as you say, the stacked sheet would have to be held with a pressure pad to be able to cut this with a water jet, laser would be a fail also as it would not have a very good cut finish being .001" thick, so a simple die with a pressure pad built in would be the most efferent way to do this

    Mactec54


  8. #8
    Member awerby's Avatar
    Join Date
    Apr 2004
    Posts
    5728
    Downloads
    0
    Uploads
    0

    Default Re: How can I cut aluminum foil?

    I agree that a pressure pad would help with the waterjet operation, but that doesn't seem like a big deal to implement. It's more or less standard practice to have some kind of hold-down for anything you're cutting on a waterjet, and a simple frame fixture would probably be sufficient to hold down a stack of foil. The trouble with cutting the stack with a die is that the edges would tend to stick together; peeling them apart would be tedious with a lot of failures where the piece was thin and delicate. I suppose they could be die-cut individually, but that seems like it would take forever.

    [FONT=Verdana]Andrew Werby[/FONT]
    [URL="http://www.computersculpture.com/"]Website[/URL]


  9. #9
    Member mactec54's Avatar
    Join Date
    Jan 2005
    Location
    USA
    Posts
    15362
    Downloads
    0
    Uploads
    0

    Default Re: How can I cut aluminum foil?

    Quote Originally Posted by awerby View Post
    I agree that a pressure pad would help with the waterjet operation, but that doesn't seem like a big deal to implement. It's more or less standard practice to have some kind of hold-down for anything you're cutting on a waterjet, and a simple frame fixture would probably be sufficient to hold down a stack of foil. The trouble with cutting the stack with a die is that the edges would tend to stick together; peeling them apart would be tedious with a lot of failures where the piece was thin and delicate. I suppose they could be die-cut individually, but that seems like it would take forever.
    You would not be stacking them with a press operation, it would be faster, cleaner and much less cost, per part to do it with a press operation, a water jet the material normally just sits on the machine, just like a plasma machine and there are no previsions to hold a stack such as foil like this, other industries use water jet to cut out stacks of clothing, these are not the standard water jet machine though, here is one cutting .010" thick material, .001" would be much more difficult to do



    Mactec54


  10. #10
    Member oneeye's Avatar
    Join Date
    Aug 2005
    Location
    Brazil
    Posts
    108
    Downloads
    0
    Uploads
    0

    Default Re: How can I cut aluminum foil?

    I use a 50W fiber marking machine to make jewlry. I make deep marking and cutting silver, gold, brass, aluminium max 0.8mm thick.
    I use hatch mode to cutting plates between 0.2 and 0.8mm, but if the plate is thinner the laser can cut in line, it is very quick.How can I cut aluminum foil?-20210910_110404-jpg How can I cut aluminum foil?-corte-lat-o-jpg .

    Last edited by oneeye; 10-10-2021 at 10:46 AM.


  11. #11
    Member mactec54's Avatar
    Join Date
    Jan 2005
    Location
    USA
    Posts
    15362
    Downloads
    0
    Uploads
    0

    Default Re: How can I cut aluminum foil?

    Quote Originally Posted by oneeye View Post
    I use a 50W fiber marking machine to make jewlry. I make deep marking and cutting silver, gold, brass, aluminium max 0.8mm thick.
    I use hatch mode to cutting plates between 0.2 and 0.8mm, but if the plate is thinner the laser can cut in line, it is very quick.How can I cut aluminum foil?-20210910_110404-jpg How can I cut aluminum foil?-corte-lat-o-jpg .
    His material is 0.025mm

    Mactec54


  12. #12
    Member oneeye's Avatar
    Join Date
    Aug 2005
    Location
    Brazil
    Posts
    108
    Downloads
    0
    Uploads
    0

    Default Re: How can I cut aluminum foil?

    Quote Originally Posted by mactec54 View Post
    His material is 0.025mm
    as
    No problem, i've already cut aluminum foil used in the kitchen, it's very thin. Will make a video tomorrow cuttng a kitchen aluminium foil with same shape as him photo.



  13. #13
    Member mactec54's Avatar
    Join Date
    Jan 2005
    Location
    USA
    Posts
    15362
    Downloads
    0
    Uploads
    0

    Default Re: How can I cut aluminum foil?

    Quote Originally Posted by oneeye View Post
    as
    No problem, i've already cut aluminum foil used in the kitchen, it's very thin. Will make a video tomorrow cuttng a kitchen aluminium foil with same shape as him photo.
    I was just saying that his foil was much thinner than what you where cutting, with a laser like what you have, it should be not be problem, cost, is the problem, when you want hundreds of parts, a small hand press is going to be the most cost affective way to do this job

    Mactec54


  14. #14

    Default Re: How can I cut aluminum foil?

    laser engraver cannot cut aluminum. u will need high power laser cutting machine. IPG Laser is the best in my opinion.



  15. #15
    Member
    Join Date
    Jun 2010
    Location
    Australia
    Posts
    4252
    Downloads
    4
    Uploads
    0

    Default Re: How can I cut aluminum foil?

    That sort of shape gets punched out by the millions, so to speak. Dead cheap once you have the die. You could even make the die yourself for a low volume of aluminium parts. The inside corners would take a little work.

    Yes, you could get pressure welding at the edges, which is a right pain.
    However, if you interleave paper and foil this should control the problem.

    Cheers
    Roger



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

How can I cut aluminum foil?

How can I cut aluminum foil?