Need Help! Laser cutting in 12mm bamboo gets burned


Results 1 to 2 of 2

Thread: Laser cutting in 12mm bamboo gets burned

  1. #1
    Member AnotherJensen's Avatar
    Join Date
    Oct 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Laser cutting in 12mm bamboo gets burned

    Hi,
    I have a 130w laser, but I cant seem to cut 12 mm bamboo plates without it getting burned. Is it simply impossible to cut through bamboo this thick with a laser, or my settings completly wrong?
    Setting: 5mm/s power: 73% (max power to keep laser life) single pass…

    I have a 3” lens and Reci W6 tube

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Laser cutting in 12mm bamboo gets burned-e64bc119-7532-41b8-94d3-696dce5d0a46-jpg   Laser cutting in 12mm bamboo gets burned-0d17e42a-494f-4c12-94fd-99b643403aa1-jpg  


  2. #2
    Member
    Join Date
    Dec 2006
    Location
    USA
    Posts
    122
    Downloads
    0
    Uploads
    0

    Default Re: Laser cutting in 12mm bamboo gets burned

    If you use a small orifice nozzle with high pressure compressed air (30 psi), then you will get much better results--less burn-back, higher cut speed, reduced side-wall charring.Laser cutting in 12mm bamboo gets burned-focus_nozzle_long_focal_length_lens_co2_laser_supersonic_mahoney300x300-pngLaser cutting in 12mm bamboo gets burned-four_inch_lens_nozzle_cutting_thick_solid_wood_300x300-jpg

    Attached Thumbnails Attached Thumbnails Laser cutting in 12mm bamboo gets burned-focus_nozzle_long_focal_length_lens_co2_laser_supersonic_mahoney300x300-png   Laser cutting in 12mm bamboo gets burned-four_inch_lens_nozzle_cutting_thick_solid_wood_300x300-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Laser cutting in 12mm bamboo gets burned

Laser cutting in 12mm bamboo gets burned

Laser cutting in 12mm bamboo gets burned