We had a 200w laser machine since 2008 and it was working fine till recently when smoke seen from control card (small one on the left of the main card). Contacted the manufacturer (world cut china) and was told its issue with the main control card (MCP6615) had EOL.
Probably suggesting for us to replace the machine. Attached are the pictures of the control card.
Everything else works just couldn’t detect the laser . Any advice or suggestion are much appreciated !
Machine type : DaHeng Laser World cut 200 - flatbed type
Laser tube : synrad firefly
Servo drive
Just tried turning on the system today, laser automatically start firing and couldn’t be stopped. Got error msg when trying to send file to machine. Machine responses to y and x axis movement command from the software, just file cannot be sent over. Anyone can advice what probably happened ?