downgrade laser tube


Results 1 to 2 of 2

Thread: downgrade laser tube

  1. #1
    Member strobo2k's Avatar
    Join Date
    Mar 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default downgrade laser tube

    Hello everyone,

    I currently own a RECI W6 (130W) with which I cut 8mm HDF panels at 26% power (11,5mA) at 10mm/s.
    Given the obvious oversizing for my use, I would like to purchase a cheaper spare tube with lower wattage.

    In your experience, with a RECI T2 (90W) would I be able to perform the same process without problems? More or less, with what power / speed parameters?

    Thanks in advance.

    (Sorry for my english. Thanks to google translate.)

    Similar Threads:


  2. #2
    Member strobo2k's Avatar
    Join Date
    Mar 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: downgrade laser tube

    Can nobody tell me if with a 90w laser it is possible to cut 8mm HDF or MDF easily and the speed / power parameters?
    Thank you!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

downgrade laser tube

downgrade laser tube

downgrade laser tube