Was cutting and suddently laser lost power, only shows the beam but cant cut


Results 1 to 2 of 2

Thread: Was cutting and suddently laser lost power, only shows the beam but cant cut

  1. #1
    jpnm23's Avatar
    Join Date
    Jul 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Was cutting and suddently laser lost power, only shows the beam but cant cut

    Good afternoon, I'm beginner with laser cutting, i bought a 3018 on aliexpress with a laser 15w i think, but i was cutting this afternoon and suddently laser lost power, only shows the beam but cant cut. what could be the possible reason for this?

    Another thing is that every new pass for cut the laser was deviating a little so the cut was larger line and not thin. why?

    Thank you, best regards. João Moreira



  2. #2
    jpnm23's Avatar
    Join Date
    Jul 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Was cutting and suddently laser lost power, only shows the beam but cant cut

    What i found is that my laser burned out, and turned into led mode.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Was cutting and suddently laser lost power, only shows the beam but cant cut

Was cutting and suddently laser lost power, only shows the beam but cant cut