Two different machines
Hello, my first post here. Looking to purchase a Chinese Laser Cutter that can do plastic and metal. 1390 looks like the size I want, cutting 1.5mm Stainless steel is fine. I have a bunch of quotes rolling in. I'm getting a little leery about what details I'm getting fed by different companies and am wondering if anyone has any experience on this front?
-Some are trying to sell me a 280W Yongli Laser
-Have one guy saying it can be done with 150W Reci with Oxygen assist. (though I see no oxygen bottle or hose near the machine)
-Some say it can't be done as the laser can't be turned down and will melt the edge of the acrylic to much if I try to cut that.
-One company says it can be done with straight 150W SWL laser with different head.
Any help would be appreciated. A smaller budget is involved in my decision.
Similar Threads:
Two different machines
You're saying I should get 2 different machines, one for each job?
Exactly
One machine for metal and the other for plastic.
And you can not cut all plastics on laser cutters.
Make no mistake between my personality and my attitude.
My personality is who I am. My attitude depends on who you are.